PRODUCTOS

Conversor RS232/485 WiFi

Expert DAQ
EX9486C-W
  • Conversor RS232/485/422 - WiFi
  • 802.11b/g/n Cliente/AP
  • Detección automática de baudios 300-115200Bps

Características

WLAN

  • IEEE 802.11b/g
  • Spread Spectrum: DSSS, OFDM
  • Tx Power 11b: Maximum 20 dBm
  • Tx Power 11g: Maximum 18 dBm
  • Rx Sensitivity: -70 dBm @ 54 Mbps, -85 dBm @ 11Mbps
  • Transmission Rate: 54 Mbps (max.) with auto fallback (54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2,1 Mbps)
  • Transmission distance: Up to 300 meters(@12 Mbps, in open areas)
  • Security: WEP 64-bit/128-bit data encryption, AES, WPA2
  • Antenna Connector: Reverse SMA
  • Network Mode: Infrastructure, Ad-Hoc

 
LAN for configuration / Ethernet hub

  • Ethernet: 10/100 Mbps, RJ45
  • Protection: Built-in 1.5 KV magnetic isolation

 
Serial

  • No. of ports: 1 RS-232/422/485 port, male DB9, S/W selectable
  • RS-232 Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
  • RS-422 Signal : Tx+ , Tx- , Rx+ , Rx – ( Surge Protect )
  • RS-485 Signal : Data+ , Data- ( Surge Protect )
  • Serial Line Protection: 15 KV ESD for all signals

 
Serial Communication Parameters

  • Parity: None, Even, Odd, Space, Mark
  • Data bits: 5, 6, 7, 8
  • Stop bits: 1, 1.5, 2
  • Flow control: RTS/CTS, XON/XOFF
  • Speed: 110 bps to 460.8+ Kbps

 
Power Requirements

  • Power input 1: 12 VDC

 
Environmental

  • Operating Temperature: -10 to 70°C (32 to 131°F), 5 to 95% RH
  • Storage Temperature:-20 to 85°C (-4 to 185°F), 5 to 95%RH

 
Regulatory Approvals

  • RoHS
  • EMC: FCC Class A, CE Class A

Software Features

  • Protocols: ICMP, IP, TCP, UDP, DHCP, BootP, ARP / RARP, Telnet, RTelnet, DNS, SNMP MIB II, HTTP, SMTP, SNTP
  • Serial mode: Virtual Com / TCP Server / TCP Client / UDP / Serial Tunnel with advanced settings of
        ■ TCP Alive Check Timeout
        ■ Inactivity Timeout
        ■ Delimiter for Data Packing
        ■ Force TX Timeout for Data Packing
  • 4 Hosts simultaneous connection: Virtual Com / TCP server / TCP Client (only raw data)
  • Security: HTTPS, SSH v2
  • Programmable (Optional)
  • Event notification by email / SNMP trap

    SNMP Trap
    ■ Cold/Warm Start
    ■ DSR, DCD Changed
    ■ IP Changed
    ■ Authentication Fail
    SNMP Response
    ■ System MIB,
    ■ Interface MIB,
    ■ ICMP, IP, TCP MIB
    ■ UDP MIB
    ■ RS-232 MIB

  • Utilities: Windows NT/2000/XP/2003/VISTA

    ■ Device discovery
    ■ Auto IP report
    ■ Device setting (run-time change, no rebooting)
    ■ Access control list
    ■ Group setting
    ■ Device monitoring
    ■ Serial port monitoring
    ■ Log info
    ■ Group Firmware update batch

Haga su consulta